(English) 
LOW HEIGHT CABINET DESIGN TO EASE OF FITMENT INTO CROWDED CONTROL ROOMS.
SYMMETRICAL DRIVER LAYOUT.
IDEAL PARTNER FOR THE SCM50/100/110A PRO STEREO MONITOR LOUDSPEAKERS*.
DUAL 9”/234MM SL BASS DRIVERS, 3”/75MM SOFT-DOME MID, 1”/25MM SOFT-DOME TWEETER.
3-WAY ACTIVE DESIGN FEATURING PRECISION ACTIVE CROSSOVERS & DISCRETE MOSFET POWER AMPLIFERS, INTEGRATED AS ATC PROPRIETARY 'AMP-PACK'.
WIDE DYNAMIC RANGE AND BANDWIDTH.
*Can also partner SCM150A Pro but max SPL capability must be considered.
ACOUSTIC SPECIFICATIONS - SCM105A PRO
Drive Units...
Bass: 2 x SB75-234SL 16Ω.
Mid: 1 x SM75-150S 16Ω.
HF: 1 x SH25-76S 6Ω.
Low Frequency Cut-off: 30Hz (-6dB, anechoic).
High Frequency Cut-off: 25kHz (-6dB).
Amplitude Linearity: 50Hz - 17kHz (+/- 2dB).
Matched Response: +/-0.5dB.
Crossover Points: 380Hz & 3.5kHz.
MaxSPL: 115dB continuous, 121dB peak (per pair, IEC Weighted Pink Noise, 1m, anechoic).
System Sensitivity: 85dBC ref. -20dBu (per single unit, 1m, pink noise, bass boost 0dB, sensitivity 2.2dBu/1V).
ELECTRONIC SPECIFICATIONS - SCM105A PRO
Balanced Input: 1 x Rear Panel Mounted Female XLR, pin 2 hot.
Input Impedance: 20kΩ (differential).
Input CMRR: >82dB (10kHz).
Input Sensitivity: 2.2dBu/1Vrms for full power.
Input Sensitivity Control: Continuously Variable from 2.2dBu - 8.2dBu / 1Vrms - 2Vrms (-6dB).
Bass Boost Control: Continuously variable from 0dB to +6dB.
Crossover Filters: 4th Order Linkwitz-Riley.
Frequency Response: <2Hz to >200kHz (-3dB).
Amplifier type: Grounded Source MOSFET based Class A/B, convection cooled.
Output Power: Bass 200W (8Ω), Mid 100W (16Ω), HF 50W (6Ω).
THD+N: <0.003%/-92dB (1kHz, 1dB below rated power, 90kHz BW).
Limiter: ATC Active FET Momentary Gain Reduction, limiter 'active' indicated via front panel LED.
Mains Input: Rear panel mounted, 220-230V or 115V - Factory set. Please observe panel markings and labels!
Power Consumption: Idle 37W /51VA. 1/8th Power 132W/178VA. Full Power 321W/403VA.
Heat Output: Idle 126 BTU/hr. 1/8th power 366 BTU/hr. Full Power 413BTU/hr.
(English)
The SCM105AiWC has been designed specifically as an in-wall centre channel monitor with reduced cabinet height, to ease fitment in crowded control room front walls.
It is based upon the SCM110AiW Pro mid-field monitor and can partner a range of ATC 3-way mid-field monitors in 5.1, 7.1 surround or immersive audio formats such as Dolby Atmos.
1-channel 6U/19” rack mount amplifier to partner SCM105AiWC Pro loudspeakers, suitable for wall or rack mounting.
LOW HEIGHT IN-WALL CABINET DESIGN TO EASE FITMENT INTO CROWDED CONTROL ROOM FRONT WALLS.
SYMMETRICAL DRIVER LAYOUT.
SQUARE EDGE FRONT BAFFLE AND REAR MOUNTED INPUT PANEL FOR OPTIMAL FLUSH IN-WALL MOUNTING.
IDEAL PARTNER FOR THE SCM50/100/110AiW PRO IN-WALL MONITOR LOUDSPEAKERS*.
DRIVEN BY REMOTE MOUNTED 6U/19” ATC PROPRIETARY ACTIVE 3-CHANNEL AMPLIFIER, THE R1-350 PRO.
WIDE DYNAMIC RANGE AND BANDWIDTH.
*Can also partner SCM150AiW Pro but max SPL capability must be considered.
The acoustic and electronic specifications are identical to the SCS105AC Pro model.
PHYSICAL SPECIFICATIONS - SCM105AiW PRO
Speaker Level Input: 1 x Rear Panel Mounted Neutrik NL8.
Power/Clip LED Input: 1 x Rear Panel Mounted 5-Pin Female XLR.
Net Weight: 54.7kg / 120.6lbs.
Product Dimensions: See datasheet.
PHYSICAL SPECIFICATIONS - R1-350 AMP
Net Weight: 15.9kg/35lbs.
Product Dimensions: 265 x 483 x 222mm / 10 7/16” x 19” x 8 3/4” (H x W x D).
See data sheet for full details.
