The SCM20SLT 'Tower' is ATC's flagship 2-way floor-standing loudspeaker. It is ideal for modestly sized rooms where performance cannot be compromised and has been in continuous production since 1996.
Its sealed cabinet design ensures precise timing and excellent low frequency output below the cut-off. The combination of ATC mid/bass and soft-dome tweeter delivers mid-range & high frequency of exceptional clarity and the driver component's shared design philosophy ensures the parts work seamlessly together.
The loudspeaker is available in both PASSIVE and ACTIVE versions.
Both versions employ ATC's renowned drive units which are painstakingly designed and manufactured by ATC in the UK.
Featured speaker above is finished in rosewood veneer, other finish options shown below.
The active SCM20ASLT features an on-board 250W Amp Pack. Simply pair with a suitable pre-amplifier, DAC/pre or streaming-pre-amp for stunning results.
The active SCM20ASLT replaces the passive crossover and the driving amplifier of a 'conventional' system with a precisely matched 'Amp Pack', mounted to the rear of the loudspeaker cabinet. The electronic system consists of a balanced input feeding a 2nd order active electronic crossover which, in turn, feeds a pair of class A/B power amplifiers, carefully tailored to the exact requirements of the mid/bass and high-frequency drive units.
The active crossovers deliver greater precision in both level and timing and the two power amplifiers directly coupled to the drive units result in an improvement in control and dynamic range vs a passive system.
The cabinet is constructed to be heavy and inert with a combination of bracing for stiffness and damping to supress resonance. Bitumastic damping panels are deployed at critical positions to minimise cabinet colouration. It is available in a wide range of finishes.
The SCM20ASLT is also available as a stand-mount 'classic' model, in the form of the SCM20ASL. The performance of the floor-standing and stand-mount versions is identical and the choice of which to use comes down to your visual preference.
150mm/6” ATC 'Super Linear mid/bass driver loaded in a compact sealed cabinet.
25mm/1” ATC 'S-Spec' soft-dome dual-suspension HF driver.
On-board ATC active 250W 'Amp Pack' module.
Balanced input & 2nd order Linkwitz-Riley active crossovers.
User adjustable input sensitivity & bass shelf controls.
2 x class A/B MOSFET amplifiers, 200W bass/mid & 50W high frequency.
Hand-built in England.
6 year warranty.
ACOUSTIC SPECIFICATIONS
Bass/mid driver: 1 x 150mm/6”, SB75-150SL 8Ω
High Frequency Driver: 1 x 25mm/1”, SH25-76S 6Ω
Low Frequency Cut-off: 55Hz (-6dB, anechoic)
High Frequency Cut-off: 25kHz (-6dB)
Crossover Point: 2.2kHz
MaxSPL: 108dB continuous, 114dB peak (per pair, IEC Weighted Pink Noise, 1m, anechoic).
Sensitivity: +4dBu rev 95dBC (Bass Boost 0dB, Input Sensitivity 1V, Pink noise).
ELECTRONIC SPECIFICATIONS
Balanced Input: 1 x Rear Panel Mounted Female XLR, pin 2 hot
Input Impedance: 20kΩ (differential)
Input CMRR: >60dB at (10kHz)
Input Sensitivity: 2.2dBu/1Vrms for full power
Input Sensitivity Control: -6dB switchable, -6dB variable. Total adjustment 2.2dBu/1Vrms to 14.2dBu/4Vrms
Bass Shelf: -2dB to +3dB, switchable in 1dB steps
Crossover Filters: 2nd Order Linkwitz Riley
Amplifier type: Grounded Source MOSFET, class A/B, convection cooled
Output Power: Bass 200W (8Ω), H.F. 50W (8Ω)
THD+N: <0.0017%/-95dB (1kHz, 1dB below rated power, 90kHz BW)
Frequency Response: <2Hz to >200kHz (-3dB)
Limiter: ATC Active FET Momentary Gain Reduction
Electronic amp protection: Amplifier d.c. offset and over-temperature (both indicated by rear panel LED)
Mains Input: 220-230V or 115V, factory set. Please observe panel markings and labels!
Power Consumption: Idle 26W/41VA. 1/8th Power 116W/116VA. Full Power 312W/398VA
Heat Output: Idle 89BTU/hr, 1/8th Power 311BTU/hr, Full Power 382BTU/hr
PHYSICAL SPECIFICATIONS
Net Weight: 30.2kg/66.6lbs
Dimensions: HxWxD 990x239x366mm 39” x 97/16” x 14 3/8”
The SCM20PSLT represents ATCs highest performing 2-way, floor-standing, passive loudspeaker. The model has been in continuous production since 1996 and has evolved through three driver/crossover revisions into its current form. Music and audio afficionados worldwide enjoy its special combination of clarity, balance, mid-range detail in combination with classic styling.
It's 2-way crossover network is hand-made by ATC using very high-quality film capacitors and ATC's own air-cored inductors, employed for their lack of hysteresis and lower distortion. Input to the crossover is made via heavy duty bi-wire terminals.
The loudspeaker is ideally paired with ATC pre/power/integrated amplifiers. However, their neutral fidelity, outstanding resolution and modest load impedance also ensures excellent compatibility with a very wide range of quality electronics.
The cabinet is constructed to be heavy and inert with a combination of bracing for stiffness and damping to supress resonance. Bitumastic damping panels are deployed at critical positions to minimise cabinet colouration. It is available in a wide range of finishes.
The SCM20PSLT is also available as a stand-mount 'classic' model, in the form of the SCM20PSL. The performance of the floor-standing and stand-mount versions is identical and the choice of which to use comes down to your visual preference.
ACOUSTIC SPECIFICATIONS
Mid/Bass driver: 1 x 150mm/6”, SB75-150SL 8Ω
High Frequency Driver: 1 x 25mm/1”, SH25-76S 6Ω
Low Frequency Cut-off: 55Hz (-6dB, anechoic)
High Frequency Cut-off: 25kHz (-6dB)
Matched Response: +/-0.5dB
Crossover Point: 2.2kHz
MaxSPL: 108dB continuous, 114dB peak (per pair, IEC Weighted Pink Noise, 1m, anechoic).
System Sensitivity: 85dB (1W @1m)
ELECTRONIC SPECIFICATIONS
Recommended Power Amplifier: 75W-300W
Impedance: 8Ω nominal/5.5Ω minimum
PHYSICAL SPECIFICATIONS
Net Weight: 24.7kg / 54.5lbs
Dimensions: HxWxD 990x239x344mm 39” x 97/16” x 131/2”