SCM12i Pro (Install)

Overview

The SCM12i Pro is a compact 2-way passive monitor designed for installation into recording, post production, broadcast and film studios.
It’s compact size and exceptional performance make it an ideal loudspeaker for use in surround/multi-channel recording/mixing and immersive audio applications such as Dolby Atmos, DTS:X and Auro 3D.
To facilitate simple install, the cabinet features mounting points compatible with popular wall/ceiling brackets.
The SCM12i is designed around the same philosophy as ATC’s 2 and 3-way active monitor loudspeakers and also employs driver components & technology found in these larger models resulting in exceptional consistency across the product range.

Features

Wide bandwidth & high SPL capability
Neutral timbre & low distortion for low listener fatigue
150mm / 6” ATC CLD Bass Driver
25mm / 1” ATC Dual-Suspension HF Driver
Cabinet mounting points for wall/ceiling mount
6 year warranty

Drivers: HF ATC 1˝/25mm dual suspension Soft Dome (SH25-76 6 Ohm)
LF ATC 6˝/150mm Constrained Layer Damping (CLD) (SB45-150CLD 8 Ohm)
Amplitude Linearity: 80Hz – 16kHz (+/-2dB)
Cut Off Frequencies: 56Hz – 22kHz (-6dB freestanding)
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Maximum Continuous SPL: 108dB (per pair @ 1m)
Crossover Frequency: 2.2kHz
Recommended Power Amplifier: 75 to 300 Watts
Nominal Impedance: 8 Ohm
Connectors: Binding Posts/4mm Plugs, bi-wire
Cabinet Dimensions (HxWxD): 400x238x235mm/15.7˝x9.4˝x9.3˝ (eye bolt adds 40mm to the depth)
Weight (Per Cabinet): SCM12 Pro 11kg/24lbs, SCM12i Pro 15kg/33lbs

SCM12i User Manual

SCM12i Assembly Drawing

Compatible Mounts – Adaptive Technologies Group
MM-018 Multimount® Pan & Tilt Ceiling Speaker Mount
MM-022-BT Multimount® Pan & Tilt Speaker Wall Mount
MM-060 Multimount® Pan & Tilt Bottom & Rear Speaker Mount

Compatible Mounts – König & Meyer (K&M)
24352 Adapter Panel 1
24481 Speaker Wall Mount (can also be using on ceiling)
24496 Speaker Ceiling Mount

: P1 Pro